2410 Self-Contained Loaders

These self-contained pellet and powder loaders are low cost vacuum conveyors used for machine loading and other applications where material is moved short distances to one destination.

The 2410 10-inch Pellet Loader is a compact, low-cost vacuum loader that efficiently handles pelletized materials.

This self-contained pellet loader is used for machine loading and other applications where material is moved a short distance to one destination. It comes with a self contained power head. In addition, its low profile design allows the loader to be installed in areas where headroom is limited.

2410 Pellet Loader Conveying Rates

Based on a distance of 6 m [20 ft] and bulk density of 0.5 kg/dm3 [31 lb/ft3]. Rates vary with material characteristics, conveying distance and plant layout.

  • 2410 - Up to 450 kg/hr [1,000 lb/hr]  

2410 Powder Loader

Equipped with an automatically-cleaned filter medium, the powder loader is designed for short distance conveying, and loading of powder or granular material to one destination. It is also ideal for conveying pellets in applications where the unit’s location restricts manual filter cleaning. The unit comes equipped with a self-contained power head.

2410 Powder Loader Conveying Rates

Based on a distance of 6 m [20 ft] and bulk density of 0.5 kg/dm3 [31 lb/ft3]. Rates vary with material characteristics, conveying distance and plant layout.

  • 2410 - Up to 400 kg/hr [900 lb/hr]  
LSR Controller

LSR Controller

LSR Controller

Loaders are equipped with LSR (Loader, Single, Receiver) Controllers. Front panel controls include a potentiometer to set a draw time and an on/off switch. The controls, on even the simplest loader are capable of handling future add-on options, such as pulse-clean powder filters. ATEX stainless steel version is available for use in pharmaceutical applications or hazardous locations.


Materials of Construction

Pellet and powder loaders are available in aluminum or stainless steel. Since sections are interchangeable, loaders can be specified with stainless steel material contact areas only.

Filtration

The pellet loader includes a pancake foam filter. The powder unit’s filtration system consists of cloth filter bags that receive compressed air pulses after each draw cycle to keep them clean.

Conversion Kits

Kits are available to easily convert a 2410 Loader to a receiver for use in a 2400 Series central conveying system.